 Shingle
Hip and Ridge Units
Number 1 Grade, Blue Label
Description - Manufactured from quality Number 1
Grade, Blue Label cedar shingles. Lengths 16 inch and 18 inch; widths 7" minimum
(measured over the top at the butt end). 40 units per bundle for 16 inch;
36 units per bundle for 18 inch. |
 Number 2 Grade, Red Label
Description - Manufactured
from Number 2 Grade, Red Label cedar shingles. Lengths
16 inch and 18 inch; widths 7" minimum (measured
over the top at the butt end). 40 units per
bundle for 16 inch; 36 units per bundle for 18
inch.
|
 Handsplit Shake Hip and
Ridge Units
Number 1 Grade
Description - Manufactured from Number 1 Grade Certi-Split
shakes. Lengths 24 inch; thickness ½" medium, ¾" heavy;
widths not less than 9" (measured on the inner surface at the butt end). 20
units per bundle. |
 Taper-Sawn
Hip and Ridge Units
Number 1 Grade
Description - Manufactured from quality Number 1
Grade Certi-Sawn shakes. Lengths 18 inch, 24 inch; thickness 5/8", ¾";
widths not less than 9" (measured on the inner surface at the butt end). 20
units per bundle. |
 Number
2 Grade
Description - Manufactured
from Number 2 Grade Certi-Sawn shakes. Lengths
18 inch, 24 inch; 5/8", ¾"; widths not less
than 9" (measured on the inner surface at the butt
end). 20 units per bundle.
Exposures - The hip & ridge exposure should
be equal to or less than the exposure in the field of the roof, and should
not exceed the maximum exposure for the specified length.
Recommended Use - The appropriate
hip and ridge unit should be selected to match the adjacent
shingles and shakes.
|
